產品資訊
PW-606 Water Based PU Top Coat
PW-606 is a two component, water based, high performance polyurethane hard coating which provides, chemical and abrasion resistance. It offers excellent outstanding weather with color stability.PW-606 is used in a variety of general flooring applications including supermarket, Food processing factory and car park lots. It is also used in stadiums floors, etc.
■ Features
1.Low odor、low VOC.
2.Excellent weather, aging, yellowing resistance.
3.Rigid,excellent mechanical properties and abrasion resistant.
4.Excellent water resistance & acid, alkaline resistance.
5.Excellent to apply for new substrate and repaint on any epoxy flooring.
6.Addition to the aesthetic.
7.Non flammable because of water-borne receipt.
■ Usages
1.Indoor or outdoor floors, wall, car parking lots.
2.Plant floor, food manufacturing, medical processing area.
3.Chemical factories, electroplating factories, electronics and semiconductor factories,
etc.
4.Indoor or outdoor aisles, square, stadiums floors, etc.
■ Packaging and Storage
1. Packaging:
14 kg two drum / per set.
PW-606 Component A : 12 kg.
PW-601 Component B : 2 kg.
2. Storage:
Shelf time is 6 months. Store in a cool, dry place. Keep out of the sun and rain.
■ Color
White、Lily white、Rose white、Sky blue、Baby blue、Pale gray、
Green、Medium gray、Turkey blue、Silver gray.
1. Material
● Two component water-based polyurethane hard coating / PW-606.
● Packaging:PW-606 Component A : 12 kg.
PW-601 Component B : 2 kg.
2. Surface preparation
● Do not apply when temperature is below 5°C, RH is above 85%, or when the
substrate surface is wet.
● Repair all cracks with the proper patching material of the existing substrate.
● Smooth the surface to form a uniform and level surface.
● Surface must be clean and free from oils, grease, mosses or other contaminants.
● Small stone, gravel, bricks and other sharp objects on the surface should be
removed.
3. Application
● Clean-up the tools of roller and brush before application.
● Stir PW-606 thoroughly before application, then mix PW-601B with mixing ratio
A:B=6:1 to apply the coat.
● Apply to cracks, corners, and joints by brush first.
● Totally application by roller.
● Water-based polyurethane floor coating 14kg/set, every coat coverage is 0.13kg/㎡,
two layers applications are Recommended.( 55㎡ floor can be cover by two layer
construction per set).
● Avoid applying the coating in thick, or the tack free time and apparent would be
influenced.
● Use up the material as soon as possible after mixing A with B.
■ imitation
1.The coverage rate will depend on the condition of the surface.
2.Thinner can be used as diluting and cleaning tools.
3.Do not apply when temperature is below 5℃, rainy day or RH above 85%.
4.Strictly follow mix ratio recommendations.
5.Since component B reacts with moisture to gel easily, cover the container tighly.
■ Typical properties
Item | Property |
Mixing ratio |
PW-606 : PW-601B 6 : 1 |
Solid content (%) | 50 above |
Theoretical Coverage(Kg/㎡ ) | 0.13 |
Application | Roller |
Tack free time (min) | Under 30 min at 25oC |
Working time (hr) |
1hr at 25ºC |
Re-coating interval (hr) | 8hrs above at 25ºC |
Full cure (day) |
7 days at 25ºC |
■ Physical properties
ltem | Method | Testing results |
Hardness | pencil | ≦ 3H |
Gloss | 60º angle on the glossmeter |
Under 20 GU |
Impact resistance | ASTM D2794 | 50 Kg.cm |
Cross cut | ASTM D3359 | ≧ 4B |
Abrasion resistance | CS 10, 1Kg,1000 rpm |
< 50 mg |
Adhesive strength | CNS 8082 | OK |
Water permeability | CNS 8082 | OK |
Wet-Scrub resistance | CNS 8082 | OK |
Alkali resistance | CNS 8082 | OK |
Weather resistance | CNS 8082 | OK |